How to use the user data

The contents of the setting menus can be saved in the user area of the camera’s memory, and they can be loaded from this area. Use of this data speeds up the process of reproducing suitable setup statuses.

User data operation

Menus are used to save the setting menu contents in the user area of the camera’s memory and load them from this area.

Saving the user data

1 Perform the menu operations (pages 86 to 88), and display the “INITIALIZE” screen of FILM (CAM) MAIN MENU 4.

n< INITIALIZE >

READ FACTORY DATA

WRITE USER DATA

SCENE SEL :1

READ

WRITE

RESET

TITLE1:

TITLE2:

TITLE3:

TITLE4:

2 Turn the JOG dial button to move the arrow (cursor) to the WRITE USER DATA item.

3 When the JOG dial button is pressed, the following message appears.

WRITE ?

YES

nNO

4 Turn the JOG dial button to move the arrow (cursor) to YES, and press the JOG dial button. The data settings are saved in the user area of the camera’s memory.

5 After the data has been saved, press the MENU button twice.

The setting menu is cleared, and the displays showing the unit’s current statuses appear at the top and bottom of the viewfinder screen.

Loading the user data

1 Perform the menu operations (pages 86 to 88), and display the “CAM CARD READ/WRITE” screen of FILM (CAM) MAIN MENU 3.

n< CAM CARD READ/WRITE >

SELECT :1

READ

SELECT :1

WRITE

CARD CONFIG

TITLE READ

READ USER DATA

TITLE:

1:5:

2:6:

3:7:

4:8:

2 Turn the JOG dial button to move the arrow (cursor) to the READ USER DATA item.

< CAM CARD READ/WRITE >

SELECT :1

READ

SELECT :1

WRITE

CARD CONFIG

TITLE READ

nREAD USER DATA

TITLE:

1:5:

2:6:

3:7:

4:8:

3 When the JOG dial button is pressed, the following message appears.

READ ?

YES

nNO

4 Turn the JOG dial button to move the arrow (cursor) to YES, and press the JOG dial button. The data settings saved in the user area of the camera’s memory are loaded, and the settings are completed.

5 Press the MENU button twice.

The setting menu is cleared, and the displays showing the unit’s current statuses appear at the top and bottom of the viewfinder screen.

6 When the frame frequency setting has been changed, it is necessary to restart the unit by turning the POWER switch to OFF and then to ON again for the setting to be switched.

69