Adjusting the white shading (continued)
Writing the white shading adjustment values and flare adjustment values in the internal memory
Up to eight white shading adjustment values can be stored in the internal memory. Since they are stored at the same time as the flare adjustment values, it is recommended that the FLARE screen of CAM MAIN MENU 4 be opened and the flare adjusted before storing these values in the internal memory.
Select the file No.
1 Perform the menu operations (pages 86 to 88), and display the “LENS FILE” screen of FILM (CAM) MAIN MENU 3.
2 Turn the JOG dial button to move the arrow (cursor) to the FILE SELECT item
3 Press the JOG dial button and the file number will flash. Turn the JOG dial button to select the file (1 to 8) to be recorded.
< LENS FILE > |
|
FILE SELECT | :1 |
READ
WRITE
RESET ALL
nTITLE:
1:5:
2:6:
3:7:
4:8:
4 Press the JOG dial button to enter the file number.
Give a title to the selected file.
5 Turn the JOG dial button to move the arrow (cursor) to the “TITLE : ” item.
< LENS FILE > |
|
FILE SELECT | :1 |
READ
WRITE
RESET ALL n TITLE:
1:5:
2:6:
3:7:
4:8:
6 When the JOG dial button is pressed, the arrow (cursor) moves to the title input area, and the input mode is established.
< LENS FILE > |
|
FILE SELECT | :1 |
READ
WRITE
RESET ALL m
TITLE:
1:5:
2:6:
3:7:
4:8:
7 Press the JOG dial button again and turn it until the character to be set is displayed.
When the button is turned, the character displayed is switched in the following sequence:
Space: )
7
letters:
7
numbers:
symbols: ’, >, <, /,
8 Press the JOG dial button to enter the character.
9 Turn the JOG dial button to move the arrow (cursor) to the next position (right), and repeat steps 7 and 8 to set the characters (maximum of 12).
10 When the title has been input, turn the JOG dial button to move the arrow (cursor) to the “:” position.
< LENS FILE > |
|
FILE SELECT | :1 |
READ
WRITE
RESET ALL m
TITLE:222222222222
1:5:
2:6:
3:7:
4:8:
31