Parts and their functions (continued)Accessory mounting section

1 2 :

1

5

6

3

4

6

8

7

; 9

1Hooks for attaching shoulder strap

Attach the ends of the accessory shoulder strap to these hooks.

2Light shoe

Use this to attach the video light, etc.

3Lens mount (Bayonet type)

Use this to attach the lens.

4Lever for securing lens

Insert the lens into the lens mount 3, and turn the lens mount ring using this lever to secure the lens.

5Lens mount cap

To remove the cap, push the lever for securing the lens 4 up.

Keep the cap in place while the lens is not attached.

6Lens cable/microphone cable clamp

This clamp is for anchoring the lens cable or microphone cable.

7Tripod mount

Mount the tripod adapter (SHAN-TM700), available as an optional accessory, when the unit is to be anchored to the tripod.

8LENS terminal (12-pin)

The connecting cable of the lens is connected here. For details concerning the lenses that can be used, consult your dealer.

9Shoulder pad

This pad can be adjusted to facilitate operation when the unit is operated on the user’s shoulder. The pad position can be moved forward or backward when the two securing screws are loosened.

:Mounting hook for tape measure

The tape measure used to measure the subject distance is attached here.

<Note>

This hook is not to be used for the shoulder strap.

;Focus mark

This indicates the focus position of the CCD unit.

10