Audio input preparation (continued)
When attaching a microphone to the main unit for use
Attaching the
1 Remove the screws used to attach the mic holder.
2Attach the microphone holder
Screws provided with mic holder
3 Attach the microphone to the microphone holder and tighten the locking screw.
Locking screw
5 Connect the microphone’s connecting cable to the MIC IN jack on the camera.
MIC IN jack
6 Set the AUDIO IN switch or switches to “FRONT” in accordance with the audio channel or channels whose sound is to be recorded.
AUDIO IN switches
4 Loosen the locking lever and adjust the microphone angle then tighten the locking lever again.
Locking lever
36