Adjusting the white shading (continued)
Reading the white shading adjustment values and flare adjustment values from the internal memory
1 Perform the menu operations (pages 86 to 88), and display the “LENS FILE” screen of FILM (CAM) MAIN MENU 3.
2 Turn the JOG dial button to move the arrow (cursor) to the FILE SELECT item
3 Press the JOG dial button and the file number will flash. Turn the JOG dial button to select the file (1 to 8) to be read.
< LENS FILE > |
|
n FILE SELECT | :1 |
READ
WRITE
RESET ALL
TITLE:
1:5:
2:6:
3:7:
4:8:
7
8
Turn the JOG dial button to move the arrow (cursor) to YES, and press the JOG dial button. The recorded data from the white shading file is read.
Press the MENU button twice.
The setting menu is cleared, and the displays showing the unit’s current statuses appear at the top and bottom of the viewfinder screen.
4 Press the JOG dial button to enter the file number.
5 Turn the JOG dial button to move the arrow (cursor) to the READ item
< LENS FILE > |
|
FILE SELECT | :1 |
n READ WRITE RESET ALL
TITLE:
1:5:
2:6:
3:7:
4:8:
6 When the JOG dial button is pressed, the following message appears.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
READ ?
YES
n
NO 
33