SD memory card operations (continued)

Saving the data settings on the card

1 Perform the menu operations (pages 86 to 88), and display the “CAM CARD READ/WRITE” screen.

n< CAM CARD READ/WRITE >

SELECT :1

READ

SELECT :1

WRITE

CARD CONFIG

TITLE READ

READ USER DATA

TITLE:

1:5:

2:6:

3:7:

4:8:

Give a title to the selected file.

4 Turn the JOG dial button to move the arrow (cursor) to the “TITLE : ” item.

< CAM CARD READ/WRITE >

SELECT :1

READ

SELECT :1

WRITE

CARD CONFIG

TITLE READ

READ USER DATA

nTITLE:

1:5:

2:6:

3:7:

4:8:

Select the file No.

2 Turn the JOG dial button to move the arrow (cursor) to the SELECT item which comes avove WRITE, and press the JOG dial button.

< CAM CARD READ/WRITE >

SELECT :1

READ

n SELECT :1

WRITE CARD CONFIG TITLE READ READ USER DATA

TITLE:

1:5:

2:6:

3:7:

4:8:

5 When the JOG dial button is pressed, the arrow (cursor) moves to the title input area, and the input mode is established.

< CAM CARD READ/WRITE >

SELECT :1

READ

SELECT :1

WRITE

CARD CONFIG

TITLE READ

READ USER DATA

m

TITLE:

1:5:

2:6:

3:7:

4:8:

3 Turn the JOG dial button to select a number from 1 to 8, and press the JOG dial button.

6 Press the JOG dial button again and turn it until the character to be set is displayed.

When the button is turned, the character displayed is switched in the following sequence:

Space: )

7

letters: A—Z

7

numbers: 0—9 7

symbols: ’, >, <, /, –

7 Press the JOG dial button to enter the character.

8 Turn the JOG dial button to move the arrow (cursor) to the next position (right), and repeat steps 6 and 7 to set the characters (maximum of 8).

76