Scan reverse

Using an HD lens adapter made by Angenieux, this unit supports the ultra-prime lenses used for film cameras as a standard feature. Furthermore, it can also select the setting of the scan reverse function for canceling the image correction (reversal of the top/bottom and left/right of the images) that is performed when this adapter is used.

2

3

Turn the JOG dial button to move the arrow (cursor) to the “SCAN REVERSE” item.

Press the JOG dial button, and set the desired scan reverse.

Turn the JOG dial button, ON or OFF and press the JOG dial button to enter the selection.

Setting the scan reverse

1 Perform the menu operations (pages 86 to 88), and display the “FRAME MODE” screen of FILM (CAM) MAIN MENU 2.

n< FRAME MODE >

 

FRAME RATE RANGE

:60-12

FRAME RATE

:24

SCAN REVERSE

:OFF

USER SW FRAME RATE:24

4 Press the MENU button to exit the menu operations.

The setting menu is cleared, and the displays showing the unit’s current statuses appear at the top and bottom of the viewfinder screen.

Adjusting the audio level

When the AUTO SELECT CH1 and CH2 selector switches are set to AUTO, the audio CH1 and CH2 input levels are adjusted automatically.

Proceed as follows to adjust the audio channel 1 and 2 levels manually.

Manual audio level adjustments

1 Set the AUTO SELECT CH1 and CH2 selector switches to MAN.

2 Adjust the AUDIO LEVEL CH1 and CH2 controls in such a way that, when audio signals are input, the level meter reading will not exceed 0 dBu even under maximum signal input level conditions.

AUDIO LEVEL

CH1 control

AUDIO LEVEL

CH2 control

AUTO SELECT CH1 selector switch

AUTO SELECT CH2 selector switch

Limiter

When the audio levels have been adjusted manually, the limiter circuit is tripped by an excessively high input level. This circuit can be turned ON or OFF on the MIC/AUDIO screen of the VTR menu.

(The factory setting is OFF.)

64