Setting the frame rate using the USER1 or USER2 button
After setting your desired frame rate with the USER (USER1 or USER2) button through menu operations, you can shoot with the set frame rate simply by pressing the USER button.
You can recover the previous frame rate by pressing the USER button again.
1 Perform the menu operations (pages 86 to 88), and display the “FRAME MODE” screen of FILM (CAM) MAIN MENU 2.
n< FRAME MODE > |
|
FRAME RATE RANGE | |
FRAME RATE | :24 |
SCAN REVERSE | :OFF |
USER SW FRAME RATE :24
2 Turn the JOG dial button to move the arrow (cursor) to the “USER SW FRAME RATE” item.
3 Press the JOG dial button for setting the frame rate.
Turn the JOG dial button to select a frame rate (12 fps to 60 fps) and then press the JOG dial button to enter the setting.
4 Turn the JOG dial button to move the arrow (cursor) to the <FRAME MODE> screen title and then press the JOG dial button.
5 Turn the JOG dial button to move the arrow (cursor) to the <CAMERA SW MODE> screen title and then press the JOG dial button.
6 Turn the JOG dial button to move the arrow (cursor) to the “USER1 SW” or “USER2 SW” item.
< CAMERA SW MODE >
FILTER INH | :ON |
SHOCKLESS AWB | :OFF |
COLOR BARS | :FULL BARS |
S.GAIN OFF | :L/M/H |
n USER1 SW | :INH |
USER2 SW | :Y GET |
S.BLK LVL | :OFF |
ECU DATA SAVE | :OFF |
AUTO KNEE SW | :OFF |
7 Turn the JOG dial button until “F.RATE” is displayed and then press the JOG dial button to enter the setting.
8 Press the MENU button to end the menu operations.
9 When the USER button is pressed in the
O If you press the USER button during recording, the frame rate will not be changed to the set rate.
O While the frame rate can be changed by the USER button operation, you cannot change the frame rate by pressing the JOG dial button and then a SYNCHRO (“+” or
62