Parts and their functions (continued)
Shooting (recording)/playback function section (1)
2
1
3
1CC FILTER/ND FILTER (filter selector) control This is used to select the filter to match the light source which is illuminating the subject. If the control setting is changed while the menu display mode is set to “3” (default setting), the new setting will appear at the setting change message display area of the viewfinder screen.
$Control settings and filter selection
CCFILTER control (large
CC filter selection
diameter) setting
A | Cross filter |
B | 3200 K |
C | 4300 K |
D | 6300 K |
<Note>
The color temperatures shown above are those when the LIGHTING item is set to TUNGSTEN or the D5600K item is set to OFF on the CAMERA SETTING screen of FILM (CAM) MAIN MENU 1.
ND FILTER control (small | ND filter selection | |
diameter) setting | ||
| ||
|
| |
1 | CLEAR (Transparent) | |
|
| |
2 | 1/4 ND | |
|
| |
3 | 1/16 ND | |
|
| |
4 | 1/64 ND | |
|
|
OThe two types shown above are provided for filter combinations.
$Examples of filter selection
Shooting conditions | CC filter |
| ND filter | |
|
|
|
| |
Sunrise, sunset, inside a studio | B (3200 K) | 1 | (CLEAR) | |
|
|
|
|
|
Outdoors under a clear sky | C (4300 | K) or | 2 | (1/4 ND) or |
| D (6300 | K) | 3 | (1/16 ND) |
|
|
|
|
|
Outdoors under cloudy or rainy | D (6300 | K) | 1 | (CLEAR) or |
skies |
|
| 2 | (1/4 ND) |
|
|
|
|
|
Snowscapes, high mountains, | C (4300 | K) or | 3 | (1/16 ND) or |
seashores or other perfectly clear | D (6300 | K) | 4 | (1/64 ND) |
scenery |
|
|
|
|
|
|
|
|
|
2Synchro scan adjustment switches
These switches become effective when the shutter switch 7 is set to ON and SYNCHRO SCAN 1 is selected (The messages “SS:1 ¢¢.¢deg” appear on the viewfinder screen). They are used to adjust the synchro scan speed.
When the
During personal computer monitor shooting, etc. adjust these switches to the positions where the horizontal bar noise inside the viewfinder is decreased.
3WHITE BAL (white balance memory selector) switch
PRST : The TUNGSTEN (3200 K) white balance value is stored in the memory.
This can be changed to DAY LIGHT (5600 K).
A or B : When the AUTO W/B BAL switch 6 is set to AWB, the white balance is automatically adjusted to match the setting position of the
CCFILTER control 1, and the adjustment value is stored in memory A or memory B.
When the CC FILTER control and the WHITE BAL switch are set to the same positions as they were when adjustment was performed, the adjustment value stored in the memory is recalled, and the unit is automatically adjusted to the white balance that corresponds to this value.
If this switch setting is changed while the menu display mode is set to “3” (default setting), the new setting will appear at the WHITE BAL switch display position on the viewfinder screen.
(Example: “A”)
14