The operations for saving setting data on the SD memory card and loading the saved data from the card are performed on the CAM CARD READ/WRITE screen of FILM (CAM) MAIN MENU 3.
Formatting the SD memory card1 Perform the menu operations (pages 86 to 88), and display the “CAM CARD READ/WRITE” screen.
n< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
TITLE READ
READ USER DATA
TITLE:
1:5:
2:6:
3:7:
4:8:
2 Turn the JOG dial button to move the arrow (cursor) to the CARD CONFIG item.
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
nCARD CONFIG TITLE READ READ USER DATA
TITLE:
1:5:
2:6:
3:7:
4:8:
3 When the JOG dial button is pressed, the following message appears on the screen.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
CONFIG ?
YES
n
NO 
4 To proceed with the formatting of the SD memory card, turn the JOG dial button to move the arrow (cursor) to YES, and press the JOG dial button. When the formatting of the card is completed, the following message appears.
<Note>
When the card is formatted, the settings statuses applying at the time are also saved in the memory.
< CAM CARD READ/WRITE >
READ
SELECT :1
WRITE
SELECT :1
CARD CONFIG
READ USER DATA
TITLE :
CONFIG OK
If one of the following messages appears when the JOG dial button is pressed, the card will not be formatted.
Error message | Remedial action |
|
|
CONFIG NG | Insert the card. |
NO CARD |
|
(SD memory card has not been |
|
inserted) |
|
|
|
CONFIG NG | The card may be defective. |
ERROR | Replace it. |
(the card cannot be formatted) |
|
|
|
5 Press the MENU button to exit the menu operations.
The setting menu is cleared, and the displays showing the unit’s current statuses appear at the top and bottom of the viewfinder screen.
<Note>
Data titles cannot be recognized when the SD memory card was inserted while the CAM CARD READ/WRITE screen was open. Move the arrow (cursor) to the TITLE READ item, and press the JOG dial button.
The data title is recognized, and the title is displayed.
75