Panasonic HDC27H LENS FILE screen, GENLOCK/IRIS screen, LENS FILE (CARD R/W) screen, Setting menu screens FILM (CAM) MAIN MENU 3 (continued)

Setting menu screens FILM (CAM) MAIN MENU 3 (continued)

LENS FILE screen

The lens files are stored into the unit’s internal memory and read from the memory on this screen. The white shading data and flare adjustment data are stored together as a lens file.

	Item		Variable	VF	Remarks
			range	display
FILE SELECT			1	USER	For selecting the number
			:	ENG	of the file to be read or
S	U F	E	8		written.
READ			==	USER	For reading the lens files.
				ENG
WRITE			==	USER	For writing the lens files.
				ENG
RESET ALL			==	USER	For returning all the data
				ENG	from lens files 1 to 8 to the
					factory setting.
TITLE 1: -			¢¢¢¢¢¢	USER	For enabling titles each
TITLE 8:			¢¢¢¢¢¢	ENG	consisting of a maximum
					of 12 characters to be set
					for the files.

<Note>

When RESET ALL is executed, the white shading adjustment value and the flare setting value are reset to the factory default values.

LENS FILE (CARD R/W) screen

The contents of the eight lens files recorded in the internal memory are written on the SD memory card on this screen. Alternatively, the lens files written on the SD memory card are read into the internal memory on this screen.

	Item		Variable	VF	Remarks
			range	display
CARD FILE			1	USER	For selecting the number of
SELECT			:	ENG	the file to be read from the
			8		SD memory card or written
S	U F	E			on the SD memory card.
READ			==	USER	For reading lens files from
				ENG	the SD memory card.
WRITE			==	USER	For writing lens files to the
				ENG	SD memory card.
TITLE 1: -			¢¢¢¢¢¢	USER	For enabling titles each
TITLE 8:			¢¢¢¢¢¢	ENG	consisting of a maximum
					of 12 characters to be set
					for the files.

GENLOCK/IRIS screen

The genlock and iris control settings are performed on this screen.

	Item						Variable	VF	Remarks
							range	display
H PHASE						00		USER	For coarsely adjusting the
COARSE						:		ENG	H phase during genlock.
						15
H PHASE FINE						00		USER	For finely adjusting the H
						:		ENG	phase during genlock.
						64
A. IRIS LEVEL						000		USER	For setting the auto iris
						:		ENG	target level.
						050			The brightness (iris) is
						:			controlled using this value.
						100			The higher the value
									selected, the higher the
S	C	U	F	E					brightness.
A. IRIS						000		USER	For setting the ratio
PEAK/AVE						:		ENG	between the auto iris peak
						050			and average value.
						:			The closer the setting is to
						100			0, the greater the
									tendency toward average
									control; conversely, the
									closer the setting is to
									100, the greater the
									tendency toward peak
S	C	U	F	E					control.
A. IRIS MODE							NORM1	USER	For selecting the auto iris
							NORM2	ENG	mode.
							CENTR		NORM1:
									The light is measured for
									the entire screen (except
									for the edges).
									NORM2:
									The light is measured for
									the entire screen (except
									for the top part).
									CENTR:
									The light is measured in
									the center area of the
									screen only.
S	C	U	F	E
S. IRIS LEVEL						000		USER	For setting the super iris
						:		ENG	target level.
						080			(Backlight compensation
						:			mode)
S	C	U	F	E			100
IRIS GAIN							CAM	USER	For setting whether the iris
							LENS	ENG	gain is to be adjusted by
S	C	U	F	E					the camera or lens.
IRIS GAIN						01		USER	For setting the iris gain
VALUE						:		ENG	adjustment value.
						06
						:
S	C	U	F		E		10

The underlining in the variable range column indicates the setting in the preset mode.

108