Panasonic KX-FL501 Advanced features, Features Summary, How to set menu options, Code, Settings

Features Summary

Advanced features!

How to set menu options

1.Press MENU .

2. Rotate	JOG DIAL until the following is
displayed.
	Display:	ADVANCED MODE
Press	SET and rotate JOG DIAL until

the desired feature is displayed.

3.Press SET .

Programming table

4.Rotate JOG DIAL until the desired setting is displayed.

5.Press SET .

6.Press MENU .

Note:

●Step 4 may be slightly different depending on the feature.

●See page 52 for more details.

Code	Display & Feature	Settings		How the unit operates
		ON	“ON”:The unit will print the journal
	AUTO JOURNAL
			report automatically after every 30
#22
	To print the journal report		new fax communications (p. 34).
		OFF
	automatically for fax communications.
			“NEXTFAX”: This setting is effective
	OVERSEAS MODE
		NEXT FAX	only for the next attempted fax
	If you have difficulty sending an		transmission. After transmission, the
	overseas fax, activate this feature		unit will return to the previous setting.
#23	before starting transmission. This	ERROR	“ERROR”: When the previous fax
	feature makes sending documents		transmission fails and you redial
	easier as the transmission speed is		the same number.
	slowed down.		This feature is not available for
			●
		OFF	broadcast transmission.
			The calling charge may be higher.
			●
			To send a document:
	DELAYED SEND
		ON /	1.	Insert the document.
	To send a fax automatically at a		2.	Follow steps 1–3 above.
	specified time.	fax no. /	3.	Rotate JOG DIAL				to select “ON”.
	This allows you to take advantage	hh:mm	4.	Press		SET .
	of low-cost calling hours offered by		5.	Enter the fax number.
#25	your telephone company.		6.	Press		SET .
	●		7.	Enter the transmission start time.
	The setting can be reserved to			Press			to select “AM” or “PM”.
	take place up to 24 hours in		8.
	advance.	OFF		Press		SET .
			9.	Press		MENU .
			To cancel after programming,
			●
			press		STOP then			SET .
		ON	“ON”:The unit will print the Caller
	AUTO CALL. LIST
			ID list automatically after every 30
#26
	To print the Caller ID list		new calls (p. 28).
		OFF
	automatically.

(The default setting is in bold type.)

55