Tight
E. Install the film cartridge into the unit.
F. Make sure that the blue label on the cartridge matches the one on the unit.
G. Close the cover securely by pushing down on both corners.
C. Remove the leaflet from the unit.
D. If the film in the film cartridge is slack, tighten it by winding the bottom side gears.
Incorrect
Correct
Quick Start
Installation
Remove the shipping tape from the unit and stacker, and install as follows.
Shipping tape
| Shipping tape |
1 | Cover |
Film cartridge (See page 19.) |
A.Slide the cover open lever forward.
B.The cover is under tension to improve print quality.
Pull up hard enough to open.
Cover open lever
Blue label
Bottom side gears
Blue labels | Blue gear |
|
Leaflet
4 | For Assistance, Call |
|
|