Copying
Making a copy
The unit can make single or multiple copies (up to 99). Any transmittable document (see page 47) can be copied.
1 Open the document feeder tray.
●If the display shows “CHECK PAPER”, make sure you pull the paper set lever when installing paper.
2 | Adjust the width of the document guides to the size | |||
of the document. |
|
| ||
3 | Insert the document (up to 15 pages) FACE | |||
DOWN until a single beep is heard and the unit | ||||
| grabs the document. |
|
| |
|
|
|
| |
| Display: |
| STANDARD | |
|
|
| ||
| ● Make sure the handset is hung up. | |||
4 | If necessary, press RESOLUTION | repeatedly to | ||
select the desired setting (see the bottom of | ||||
| page 41). |
|
| |
5 | Press START/COPY/SET . |
| ||
|
| NUMBER=1 [100%] | ||
|
|
| ||
6 |
|
| ||
Enter the number of copies (up to 99). | ||||
7 | If necessary, choose an enlargement/reduction | |||
rate by pressing ZOOM ( | / | ). See the next |
page.
●If you select “200%”, you cannot make multiple copies (see the instructions on the right) or change the resolution.
8 | If you wish to print collated, press COLLATE | |
until the following is displayed. See the instructions | ||
| on the next page. |
|
| COLLATE=ON | |
|
| |
9 |
|
|
Press START/COPY/SET . | ||
| ● The unit will start printing. |
BLANK
PAPER
Paper set lever
Document feeder tray
COLLATE
Document feeder tray
Document guides | FACE DOWN |
|
ZOOM ( / ) | STOP | RESOLUTION |
| ||
| START/COPY/SET |
COPYING
Note:
●If a resolution is not selected, FINE resolution will automatically be selected.
●You can make or receive a voice call while making copies.
●After copying, the enlargement/reduction rate setting will return to “100%”.
Press STOP .
To eject the document, press STOP again.
To make multiple copies of an enlarged documentMake a single enlarged copy by selecting
“200%” using ZOOM ( ) first, then make multiple copies of the enlarged document.
76