
Sending Faxes
1 | Open the document feeder tray. |
| |
2 | Adjust the width of the document guides to the size | ||
of the document. |
| ||
3 | Insert the document (up to 15 pages) FACE | ||
DOWN until a single beep is heard and the unit | |||
| grabs the document. |
| |
|
|
| |
| Display: |
| STANDARD |
4 |
|
| |
If necessary, press RESOLUTION repeatedly to | |||
select the desired setting (see the bottom of | |||
| page 41). |
| |
5 | Press |
| |
| IQFAX TO WHERE? | ||
|
| ||
6 |
|
| |
Enter the fax number using the dial keypad, | |||
| |||
● You can use the BROADCAST key (see pages 52 and 53).
FAX=
7 Press START/COPY/SET .
TRYING
CONNECTING.....
SENDING P1
SENT TO SERVER
●If the number you dialed is out of the FaxSav network service area, the unit will show the following messages and send the fax directly over the telephone line.
OUT OF NETWORK
SENDING NORMAL
●If “OUT OF NETWORK” is displayed when sending a fax long distance or internationally when using
BROADCAST
Document guides
Document feeder tray
Dial keypad 
FACE DOWN
START/COPY/SET
RESOLUTION
If you cannot send a faxContact FaxSav at
The FaxSav customer service center may send you a program update. While receiving this update, you will not be able to operate the unit and the following message will be displayed for about 3 minutes. During this time, you also will not be able to operate extension telephones, if they are connected.
Display: LOADING
If a loading error occurs, the unit will display the following message.
LOADING ERROR
In this case, contact FaxSav at
46