2.8 Connection of Doorphones, Door Openers, External Sensors, and External Relays

Connection of Door Openers, External Sensors, and External Relays

Use 8-pin and 10-pin terminal blocks (included with the card) for connection.

1.While pressing down on the hole at the top of the terminal block using a screwdriver, insert the wire into the side hole as shown below. Repeat this procedure for other door openers, external sensors, and external relays.

Refer to "2.5.1 DPH4 Card (KX-TDA5161)"for pin assignments.

Door Opener

External Sensor/

External Relay Device

2.Attach the terminal blocks to the connectors of the DPH4 card in the Hybrid IP-PBX.

To door openers/ external relays

To external sensors

Installation Manual 119

Page 119
Image 119
Panasonic KX-TDA50 installation manual Door Opener External Sensor External Relay Device