Panasonic KX-TDA50 Installation of the Hybrid IP-PBX PC Programming Software, System Requirements

3.3Installation of the Hybrid IP-PBX PC Programming Software

3.3Installation of the Hybrid IP-PBX PC Programming Software

3.3.1Installing and Starting the KX-TDA50 Maintenance Console

System Requirements

Required Operating System

•Microsoft® Windows® 98 SE, Windows Me, Windows 2000, or Windows XP

Minimum Hardware Requirements

•CPU: 300 MHz Intel® Celeron® microprocessor

•HDD: 100 MB of available hard disk space

•RAM: 128 MB of available RAM

Installing the KX-TDA50 Maintenance Console

Notes

•Make sure to install and use the latest version of the KX-TDA50 Maintenance Console.

•To install or uninstall the software on a PC running Windows 2000 Professional or Windows XP Professional, you must be logged in as a user in either the "Administrators" or "Power Users" group.

•To connect the PC to the Hybrid IP-PBX via USB, the KX-TDA USB driver must be installed. Follow the instructions of the wizard to install the KX-TDA USB driver. When the Hybrid IP-PBX is first connected to the PC via USB, you may be asked to select the appropriate USB driver. Browse for and select the KX-TDA USB driver that was installed previously.

1.Copy the setup file of the KX-TDA50 Maintenance Console to your PC. (Its icon is shown here, on the left.)

2.Double-click the setup file to run the installer.

3.Follow the on-screen instructions provided by the installation wizard.

Installation Manual 133