Panasonic KX-TDA50 installation manual Mounting on Concrete or Mortar Wall

2.2 Installation of the Hybrid IP-PBX

Mounting on Concrete or Mortar Wall

CAUTION

Drive mounting screws into the wall. Be careful to avoid touching any metal laths, wire laths or metal plates in the wall.

1.Place the reference for wall mounting (on the following page) on the wall to mark the two screw positions.

110mm

(4-5/16 in)

2.Install two anchor plugs (user-supplied) in the wall.

Hammer Anchor Plug

30 mm

(1-3/16 in)

8 mm (5/16 in)

3.Install the screws (included) in the wall.

Drive the screw to this position.

4.Hook the AC adaptor on the screw heads.

Note

Be careful not to drop the AC adaptor.

Installation Manual

57