Panasonic KX-TDA50 Pager, PC/Printer via RS-232C, Pin Assignments, Connection Charts

2.9 Connection of Peripherals

Pager

Only one paging device (user-supplied) can be connected to the Hybrid IP-PBX.

CAUTION

An External Paging Jack is a SELV port and should only be connected to an approved SELV device.

PC/Printer (via RS-232C)

The Hybrid IP-PBX is equipped with an RS-232C interface. This interface provides communication between the Hybrid IP-PBX and the user-supplied devices such as PC or line printers. The RS-232C port is used for system programming, SMDR, diagnostics and external system database storage (save/load) functions.

When using special accessories such as cable, the user should use those specified in this installation manual to comply with the limits for a Class B digital device pursuant to the FCC Rules.

Note

Use an RS-232C cross cable for connection between the Hybrid IP-PBX and PC.

Pin Assignments

		No.	Signal Name	Function	Circuit Type
					EIA	CCITT
1	5	2	RD (RXD)	Receive Data	BB	104
		3	SD (TXD)	Transmit Data	BA	103
6	9	4	ER (DTR)	Data Terminal Ready	CD	108.2
		5	SG	Signal Ground	AB	102
		6	DR (DSR)	Data Set Ready	CC	107
		7	RS (RTS)	Request To Send	CA	105
		8	CS (CTS)	Clear To Send	CB	106

Connection Charts

For connecting a printer/PC with a 9-pin RS-232C connector

Hybrid IP-PBX (9-pin)

Circuit Type	Signal	Pin No.
(EIA)	Name
BB	RD (RXD)	2
BA	SD (TXD)	3
CD	ER (DTR)	4
AB	SG	5
CC	DR (DSR)	6
CA	RS (RTS)	7
CB	CS (CTS)	8

Printer/PC (9-pin)

Pin No.	Signal	Circuit Type
	Name	(EIA)
2	RD (RXD)	BB
3	SD (TXD)	BA
4	ER (DTR)	CD
5	SG	AB
6	DR (DSR)	CC
7	RS (RTS)	CA
8	CS (CTS)	CB

Installation Manual

121