Panasonic installation manual Wall Mounting KX-TDA50, Mounting on Wooden Wall

2.2 Installation of the Hybrid IP-PBX

2.2.8Wall Mounting (KX-TDA50)

Mounting on Wooden Wall

1.Place the reference for wall mounting (on the last page of this manual) on the wall to mark the three screw positions.

130 mm (5-1/8 in)

250mm

(9-13/16 in)

2.Install the screws and washers (included) in the wall. Washer

Drive the screw to this position.

Notes

•Make sure that the screw heads are at the same distance from the wall.

•Install the screws perpendicular to the wall.

3.Hook the main unit on the screw heads.

Notes

•Do not block the openings of the cabinet. Leave at least 20 cm (8 in) of space above and 10 cm (4 in) to the sides of the Hybrid IP-PBX for ventilation.

•Make sure that the surface behind the cabinet is flat and free of obstacles, so that the openings on the back of the cabinet will not be blocked.

•Be careful not to drop the cabinet.

52

Installation Manual