Panasonic KX-TDA50 installation manual Installing Optional Service Cards, Card Slot Number Type

2.2 Installation of the Hybrid IP-PBX

	Card						Slot Number
	Type	Max	02	03	04	05		06	07	08	09	10	11
SVM2		2
*1	Including one LCOT4 card that is installed by default.
*2	Only one of the HLC, DLC4, SLC4 or PLC4 card can be installed.
*3	A maximum of two DLC8, SLC8 and PLC8 cards can be installed.

CAUTION

To protect the main board from static electricity, do not touch parts on the main board or on the optional service cards. To discharge static electricity, touch ground or wear a grounding strap.

Notes

•When installing or removing the optional service cards, the power switch of the Hybrid IP-PBX must be in the off position.

•For each card, the maximum number that can be installed in the Hybrid IP-PBX is listed in "1.3.1 Optional Equipment".

•Any card that exceeds the capacity of the Hybrid IP-PBX will be ignored.

•When the Hybrid IP-PBX starts up with an invalid configuration, some cards will be ignored.

Installing Optional Service Cards

1.Before installing the optional service cards, cut and remove the appropriate dummy cover plates from the main unit.

Dummy Cover Plate

CAUTION

For safety reasons, smooth the cut edges after removing the dummy cover plates.

42

Installation Manual