Panasonic KX-TDA50 installation manual Starting the Hybrid IP-PBX, System Initialization Procedure

2.11 Starting the Hybrid IP-PBX

2.11 Starting the Hybrid IP-PBX

2.11.1 Starting the Hybrid IP-PBX

CAUTION

•The SD Memory Card must be inserted in the SD Memory Card slot of the main board before startup.

•Before touching the System Initialize Switch, discharge static electricity by touching ground or wearing a grounding strap.

•Once you have started the Hybrid IP-PBX and if you unplug the Hybrid IP-PBX, do not perform the following procedures to start the Hybrid IP-PBX again. Otherwise, your programmed data is cleared. To restart the Hybrid IP-PBX, refer to "4.1.4 Using the Reset Button".

•The Hybrid IP-PBX will continue to be powered even if the power switch is turned "OFF".

•The power supply cord is used as the main disconnect device. Ensure that the AC outlet is located near the equipment and is easily accessible.

System Initialization Procedure

1.Slide the System Initialize Switch to the "SYSTEM INITIALIZE" position.

RUN Indicator

ALARM Indicator Reset Button

System Initialize Switch

Installation Manual 125