Panasonic KX-TDA50 installation manual First Party Call Control CTI Connection

2.6 Connection of Extensions

2.6.4First Party Call Control CTI Connection

CTI connection between a PC and a KX-T7633/T7636 DPT provides first party call control. The CTI connection is made via a USB interface (version 2.0), and uses the TAPI 2.1 protocol.

A USB Module (KX-T7601) must be connected to the KX-T7633/T7636 DPT.

Note

The operating system of the PC required for first party call control depends on your CTI application software. For details, refer to the manual for your CTI application software.

To PC

USB Cable

USB Module

Notes

USB Port

•The maximum length of the USB cable is 3 m (9 ft 10 in).

•USB Modules must not be connected to DPTs in the Digital XDP connection. In a Digital XDP connection, the PC cannot be used. If a USB module is connected to a slave DPT, the DPT will not work properly.

Installation Manual

93