2.7 Connection of 2.4 GHz Portable Stations
2.7.5Site Survey
The PS has a Radio Signal Test mode that monitors the state of the radio link to the CS. After installing the CSs temporarily, set the PS to Radio Signal Test mode and measure each CS coverage area. Then, record the results on the map of the installation site.
Testing the Radio Signal Strength
Note
Display prompts for the site survey are only available in English.
1.Enter Radio Signal Test mode.
Using the KX-TD7680
1 | 9 | 0 | CS No. |
| |||
Press 1, 9, and POWER |
| 1 to 9 | |
for more than 2 seconds. |
|
| |
To store the scan data
Scan Data No.
0 to 9
Using the
1 | 9 | 0 | CS No. |
| |||
Press 1, 9, and POWER |
| 1 to 9 | |
for more than 2 seconds. |
|
| |
To store the scan data
Scan Data No.
0 to 9
Notes
Display example:
<< SEARCHING >>
Display example:
<< SEARCHING >>
CS NO.1 LEVEL:12*1
SAVE:0123456789*2
CS NO.1 LEVEL:12*1
SAVE:0123456789*2
*1: CS number and radio signal strength level.
*2: Scan data (test result) number. Empty memory space will be indicated by a number; stored memory space will be indicated by a
