Handset equalizer

This feature clarifies the voice of the
person you are talking to, producing a
more natural-sounding voice that is
easier to hear and understand.
1Press MMENUN while talking.
2MbN: “Equalizer” a MSELECTN
3MbN: Select the desired setting.
4Press MOKN to exit.
Note:
RWhen this feature is activated, is
displayed while talking.
RDepending on the condition and
quality of your telephone line, this
feature may emphasize existing line
noise. If it becomes difficult to hear,
turn this feature off.
RThis feature is not available while
using the speakerphone.

Call share

You can join an existing outside call.
Handset
To join the conversation, press MN
when the other unit is on an outside call.
Base unit
To join the conversation, press
MSP-PHONEN when the handset is on
an outside call.
Note for handset and base unit:
RA maximum of 4 parties (including 1
outside party) can join a conversation
using 3 extensions. (4-way
conference)
RTo prevent other users from joining
your conversations with outside
callers, turn call sharing mode off
(page 29).
Power back-upoperation
When a power failure occurs, the
charged handset temporarily supplies
power to the base unit (power back-up
mode). This allows you to make and
receive calls using a handset during a
power failure. The base unit will not
perform any other functions. However,
some functions such as Caller ID and
shared phonebook are available only
when using a handset other than the
handset supplying power to the base
unit. You can program “Power
failure” and the default setting is
“Auto” (page 29).
Important:
RIf a handset is not placed on the base
unit when a power failure occurs,
“Base no power Press OFF” is
displayed. After pressing MOFFN on
the handset, place it on the base unit
to start power back-up mode.
RPower back-up mode will not work if
the battery level of the power
supplying handset is or .
RDo not lift the power supplying
handset from the base unit during
power back-up mode.
RDo not touch the handset���s charge
contacts during power back-up mode.
RIf the battery level is low, the unit will
not work sufficiently during power
back-up mode. In addition, in case
handset battery power runs out, we
recommend connecting a corded-type
telephone (without AC adaptor) to the
same telephone line or to the same
telephone line jack using a Panasonic
T-adaptor (page 4).
For assistance, please visit http://www.panasonic.com/help 19
Making/Answering Calls