Making/Answering Calls
Adjusting the handset ringer volume
n While the handset is ringing for an incoming call:
Press MDN or MCN repeatedly to select the desired volume.
n Programming the volume beforehand:
1MMENUN#160
2MbN: Select the desired volume.
3 MSAVEN a MOFFN
Temporary handset ringer off
While the handset is ringing for a call, you can turn the ringer off temporarily by pressing M
N.
Using the base unit 
When a call is being received, the
1Press
2Speak into the microphone.
3When you finish talking, press
MSP-PHONEN.
Adjusting the base unit ringer volume
n
R To turn the ringer off, press and hold MkN until the unit beeps.
n
Press MDN or MCN repeatedly to select the desired volume.
R To turn the ringer off, press and hold MCN until the unit beeps.
Note:
R Even when the ringer volume is set to off, the base unit still rings for intercom calls (page 47).
Useful features during a call
Hold
This feature allows you to put an outside call on hold.
Handset
1Press MMENUN during an outside call.
2MbN: “Hold” a MSELECTN
3To release hold, press M
N.
R Another handset user can take the call by pressing M
N.
R The base unit user can take the call by pressing
Base unit
1Proceed with the operation for your model.
n
n
2To release hold, press
MSP-PHONEN.
R A handset user can take the call by pressing M
N.
Note for handset and base unit:
R If a call is kept on hold for more than 9 minutes, an alarm tone starts to sound and the ringer indicator on the handset flashes rapidly. After 1 additional minute on hold, the call is disconnected.
R If another phone is connected to the same line, you can also take the call by lifting its handset.
For assistance, please visit http://www.panasonic.com/help | 17 |
