Intercom/Locator
Handset
1During an outside call, press MINTN to put the call on hold.
2MbN: Select the desired unit. a
MSELECTN
3Wait for the paged party to answer. R If the paged party does not
answer, press M
N to return to the outside call.
4To complete the transfer: Press MOFFN
R The outside call is being routed to the destination unit.
To establish a conference call: MMENUN a
MbN: “Conference” a MSELECTN R To leave the conference, press MOFFN. The other 2 parties can
continue the conversation.
R To put the outside call on hold: MMENUN a MbN: “Hold” a
MSELECTN
To resume the conference:
MMENUN a MbN: “Conference” a MSELECTN
Base unit
n
1During an outside call, press
MINTERCOMN.
R All registered handsets beep for 1 minute.
2Wait for the paged party to answer.
R If paged party does not answer, press MINTERCOMN to return to the outside call.
3To complete the transfer: Press
R The outside call is being routed to the handset.
To establish a conference call: Press
R To leave the conference, press
n
1During an outside call, press
MINTERCOMN.
When 2 or more handsets are registered:
–To page a specific handset, enter the handset number.
–To page all handsets, press 0 or wait for a few seconds.
2Wait for the paged party to answer.
R If paged party does not answer, press MINTERCOMN to return to the outside call.
3To complete the transfer: Press
R The outside call is being routed to the handset.
To establish a conference call: Press MCONFN.
R To leave the conference, press
R To put the outside call on hold, press MHOLDN. To resume the conference, press MCONFN.
Answering a transferred call
Handset
Press M
N to answer the page.
Base unit
Press
48For assistance, please visit http://www.panasonic.com/help
