Programming
2MbN: Select the desired setting. a MSAVEN a MOFFN
Viewing/editing/erasing call block numbers
1MMENUN#217
2MbN: Select the desired entry. R To exit, press MOFFN.
3To edit a number:
MEDITN a Edit the phone number. a MSAVEN a MOFFN
To erase a number:
MERASEN a MbN: “Yes” a MSELECTN a MOFFN
Note:
R When editing, press the desired dial key to add, MCLEARN to erase.
R When viewing, “Block w/o num” is displayed if the blocking incoming calls without phone number feature is turned on. To turn the feature off: MERASEN a MCN a MSAVEN a
MOFFN
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base unit.
Important:
R See page 5 for information on the available model.
Registering a handset to the base unit
The supplied handset and base unit are
1Handset:
MMENUN#130
2Base unit:
Press and hold MLOCATORN for about 5 seconds until the registration tone sounds.
R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step.
R The next step must be completed within 90 seconds.
3Handset:
Press MOKN, then wait until a long beep sounds.
Note:
R While registering, “Base in registering” is displayed on all registered handsets.
R When you purchase an additional handset, refer to the additional handset’s installation manual for registration.
Deregistering a handset
A handset can cancel its own registration to the base unit, or other handsets registered to the same base unit. This allows the handset to end its wireless connection with the system.
1MMENUN#131
R All handsets registered to the base unit are displayed.
2MbN: Select the handset you want to cancel. a MSELECTN
3MbN: “Yes” a MSELECTN
4 MOFFN
For assistance, please visit http://www.panasonic.com/help | 33 |
