Voice Mail Service
If you are not sure which setting is
required, contact your service provider/ telephone company.
Turning VM tone detection on/off
The default setting is “On”.
1MMENUN#332
2MbN: Select the desired setting. a MSAVEN a MOFFN
Listening to voice mail messages
The unit lets you know that you have new voice mail messages in the following ways:
–“New Voice Mail” is displayed on the handset and base unit*1 if message indication service is available.
–The message indicator on the
handset flashes slowly if the message alert feature is turned on (“Message alert”, page 44).
*1
Handset
1MVMN or
MMENUN#330
R The speakerphone turns on.
R If there are no new messages in the voice mail, MVMN is not displayed.
2Follow the
3 When finished, press MOFFN.
Base unit*1
*1
To listen to voice mail messages, you have to dial your voice mail access number manually.
Note for handset and base unit:
R If the handset and base unit *1 still indicate there are new messages even after you have listened to all new messages, turn it off by pressing and holding # until the handset or base unit*1 beeps.
R If your voice mail service uses voice mail tones and a message is over 3 minutes long, the unit may not indicate new messages.
R If your voice mail service uses voice mail tones, the tones are heard from any phone connected to the same line. If you want to use another phone to listen to voice mail messages, you have to dial your access number manually.
*1
46For assistance, please visit http://www.panasonic.com/help
