Battery recharge
Problem Cause/solution
The handset beeps and/or
flashes.
RBattery charge is low. Fully charge the batteries
(page 9).
I fully charged the batteries,
but
still flashes,
is displayed, or
the operating time
seems to be shorter.
RClean the battery ends ( , ) and the charge
contacts with a dry cloth and charge again.
RIt is time to replace the batteries (page 9).
Making/answering calls, intercom
Problem Cause/solution
is displayed. RThe handset is too far from the base unit. Move
closer.
RThe base unit’s AC adaptor is not properly
connected. Reconnect AC adaptor to the base unit.
RThe handset is not registered to the base unit.
Register it (page 33).
Noise is heard, sound cuts
in and out.
RYou are using the handset or base unit in an area
with high electrical interference. Re-position the
base unit and use the handset away from sources
of interference.
RMove closer to the base unit.
RIf you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your DSL/
ADSL provider for details.
The handset does not ring. RThe ringer volume is turned off. Adjust the ringer
volume (page 17).
RSilent mode is turned on. Turn it off (page 31).
The base unit does not ring. RThe ringer volume is turned off. Adjust the ringer
volume (page 17).
I cannot make a call. RThe dialing mode may be set incorrectly. Change
the setting (page 14).
RThe handset is too far from the base unit. Move
closer and try again.
I cannot make long
distance calls.
RMake sure that you have long distance service.
For assistance, please visit http://www.panasonic.com/help 53
Useful Information