Making calls
Using the handset
1Lift the handset and dial the phone
number.
RTo correct a digit, press MCLEARN.
2Press MN or MCALLN.
3When you finish talking, press
MOFFN or place the handset on the
base unit or charger.
Using the speakerphone
1Dial the phone number and press
MN.
RSpeak alternately with the other
party.
2When you finish talking, press
MOFFN.
Note:
RFor best performance, use the
speakerphone in a quiet environment.
RTo switch back to the receiver, press
MN/M N.
Adjusting the receiver or speaker
volume
Press MDN or MCN repeatedly while talking.
Making a call using the redial list
The last 5 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
1MREDIALN or MEN REDIAL
RIf there is a new message in the
voice mail or answering system,
MREDIALN is not displayed.
2MbN: Select the desired phone
number.
3MN
Erasing a number in the redial list
1MREDIALN or MEN REDIAL
2MbN: Select the desired phone
number. a MERASEN
3MbN: “Yes” a MSELECTN
4MOFFN
Using the base unit
nKX-TG6631 series: page 3
You can make calls with the base
unit after storing phone number in
speed dial key (page 25).
1Press the speed dial key (MAN to
MCN).
2When the other party answers,
speak into the microphone.
RSpeak alternately with the
other party.
3When you finish talking, press
MSP-PHONEN.
nKX-TG6641 series: page 3
1Dial the phone number.
2MSP-PHONEN
3When the other party answers,
speak into the microphone.
RSpeak alternately with the
other party.
4When you finish talking, press
MSP-PHONEN.
Note:
RFor best performance, use the
speakerphone in a quiet environment.
RWhile on a call, you can switch from
the base unit to the handset:
– Press MN on the handset, then
press MSP-PHONEN on the base
unit with the call sharing mode on
(page 29).
– If the handset is on the base unit,
simply lift it.
For assistance, please visit http://www.panasonic.com/help 15
Making/Answering Calls