Battery strength, To replace the battery

Installation

Installing the Battery in the Handset

Insert the battery (1), and press it down until it snaps into the compartment (2). Close the cover.

To replace the battery:

Press the notch on the cover firmly and slide it as indicated by the arrow. Replace the old battery with a new one

(p. 11). Close the cover and charge the battery for 6 hours.

	Battery Charge
	Place the handsets on the base unit and
	charger. Charge for 6 hours before
	initial use.	OR
	• The unit beeps once, the CHARGE	OR
	• The unit beeps once, the CHARGE
	indicator lights, and “Charging” is
	displayed.
	• When the battery is fully charged, “Charge
	completed” is displayed.	AND
		AND
		CHARGE Indicator

Battery strength

You can confirm battery strength on the handset display.

Battery strength is indicated by the icons shown in the chart to the right.

Display prompt	Battery strength
5	Fully charged

6	Medium

7	Low

074 (flashing)	Needs to be recharged.

8	Discharged

Page 10

Image 10

Panasonic KX-TG2361JX Installation Installing the Battery in the Handset, Battery strength, To replace the battery

Contents

Dual Handsets Digital Cordless Answering System Charge the battery for 6 hours before initial usePulse-or-tone dialing capability Accessories included For your future reference For Best Performance Battery ChargeBase Unit Location/Noise Contents Contents Answer on Button Location of ControlsBase unit Message Button p Greeting REC Record Charger unit Location of ControlsHandset OFF Button Base unit display Handset soft keysHandset navigator key Talk 00-00-32 KVE MuteL Installation Connections To replace the battery Installation Installing the Battery in the HandsetBattery strength Display prompt Battery strength Battery replacement InstallationBattery information Recharge Initial setting Programmable SettingsHow to select a function item from the menu Then press Save to save your setting Programmable Settings Function Menu Table Handset Main menu Programmable Settings Date and Time Handset To confirm the date and time, repeat steps 1 and 2 above Programmable Settings Dialing Mode Handset Programmable Settings Line Mode Handset Auto Talk Handset Handset ringer volume Handset Programmable Settings Ringer VolumeRinger setting To turn the ringer on, press Volume or Programmable SettingsBase unit ringer volume Base Unit Ringer Tone Ringer tone 1Tone KBack dB SaveL Setting the base unit ringer tone by using the HandsetSelect the desired ringer tone by pressing d or B To 3 Bell ringer patterns To 7 Melody patterns Greeting Message Base Unit Programmable Settings LCD Contrast HandsetPreparing the Answering System Scroll to LCD contrast by pressing d or To review the greeting Preparing the Answering SystemTo record a greeting message To erase the greeting Pre-recorded greeting Flash Memory Message Backup Message storageCaller’s Recording Time Handset Recording time Toll saver Number of Rings HandsetSelect the number of rings by pressing d or Number of rings Scroll to Recording mode by pressing d Preparing the Answering System Recording Mode HandsetRecording mode Select the recording mode by pressing d or To have a hands-free phone conversation Using the Handset HandsetMaking Calls Hands-free Digital Duplex Speakerphone To dial after confirming the entered number To redial using the redial list Memory RedialMaking Calls To redial the last number dialed Voice Enhancer Technology To put a call on holdBacklit LCD display/Lighted handset keypad Press SP-PHONE Making Calls Using the Base Unit Base UnitTo adjust the speaker volume during a conversation Dial a phone number OFF s Auto Talk Answering CallsTalk into the MIC To hang up, press SP-PHONE To transfer the call to another person, see pages Private name display Caller ID ServiceHow Caller ID information is displayed Display Meaning Caller ID Service Using Talking Caller ID Announcing caller information Talker Caller ID Base unit Talking Caller ID feature Handset Caller ID ServiceHandset Talking Caller ID feature Handset To turn Talking Caller ID on or off Viewing the Caller List Handset Using the Caller ListPress Rcvd calls, d, or B to enter the Caller List What , means Using the Caller ListCalling Back from the Caller List Handset If a caller calls more than once 15553215555 Scroll to the desired caller by pressing d orPress Select Press Edit 15553215555 Kf MENU=Save PL 015553215555 Scroll to the desired caller by pressing d or Press Rcvd calls, d, or B to enterCaller List Press Select To erase all entries Using the Caller List Erasing Caller Information HandsetTo erase a specific caller Then press Erase Storing Names and Numbers Handset Phone BookTo store an emergency number Selecting characters to enter names If you make a mistake when entering a name or numberPhone Book For example, to enter Tom To search for a name by initial Phone Book Dialing from the Phone Book HandsetPress Search Press d repeatedly until the desired name is displayed While you are on a call Press Menu Chain Dial HandsetIndex table Search for the desired item by pressing d or Erasing an Item in the Phone Book Handset Phone Book Editing an Item in the Phone Book HandsetJane Walker Press Menu Scroll to Copy phone book by pressing d Phone Book Copying Items in the Phone Book HandsetTo copy one phone book item to another handset Press Select at Copy 1 item Copy all items Phone BookCopy phone book Scroll to Copy all items by pressing d Press HOLD/INTERCOM IntercomMaking Intercom Calls Press LOCATOR/INTERCOM During an intercom call IntercomAnswering Intercom Calls Press C, s or HOLD/INTERCOM Intercom Voice Paging Base Unit When stop paging, press SP-PHONE or LOCATOR/INTERCOMTo make a voice announcement to all handsets, press 3 Transferring a Call Press SP-PHONE or LOCATOR/INTERCOM to answer From a Handset to another Handset Transferring a CallQuick call transfer During a call, press HOLD/ Intercom Conference CallsTo join a conversation Call Share To page the base unit, press Temporary Tone Dialing Special FeaturesFor Call Waiting Service Users Muting Your Conversation Set flash time Special Features Using the Pause KeySelecting the flash time Handset Scroll to Set flash time by pressing d Base unit incoming call tone Handset Special Features Incoming Call Tone Handset Base UnitHandset incoming call tone Handset Incoming call Dial Lock Handset Special Features Key Tone HandsetTo turn the Dial Lock on To cancel the Dial Lock Special FeaturesDial lock Handset Registering Handset 1 Registered Press Answer on to turn on the Answering System Setting the Unit to Answer Calls Base UnitAutomatic Answering Operation Press Answer ON, Greeting REC, or To turn the incoming call monitoring feature off To play back messages Listening to MessagesPress Message To end remote operation, press OFF Press Menu Press Select at Message playVoice menu To call back the displayed number For Caller ID service users pListening to Messages 5557778888 KRepeat SkipL KEdit CallL Erasing all messages Erasing MessagesErasing a specific message Within 10 seconds, press Erase again When finished, press Memo or Stop Recording a Memo Message Summary of remote operation Remote Operation from a Touch Tone PhoneRemote Code Handset Enter a 2-digit remote code Remote Operation from a Touch Tone Phone Voice Menu Talk after the long beep To turn on the Answering System Direct commandsSkipping the greeting Optional Headset Connecting the optional headsetBelt Clip To attach the belt clip To remove the belt clip Wall Mounting Wall Template Wall Mounting Wall Template for the Charger unit Direct Commands Menu item Command Selection items Direct Commands During programming If the Following Appears on Your Display Display message Cause & Remedy If the Following Appears on Your Display Problem Cause & Remedy TroubleshootingTelephone System Troubleshooting Troubleshooting Answering System But Recharge battery is Problem Cause & RemedyRecharge battery is General Safety Instructions Specifications Safety Instructions 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan PQQX14264ZA F0504-0D