Panasonic KX-TG2361JX Handset soft keys, Handset navigator key, Base unit display

Location of Controls

Handset soft keys

J 5

Talk

00-00-32

K(VE) MuteL

Two soft keys are used to select functions displayed directly above each key. Functions displayed above the keys will change depending on the state of use.

On this sample display, “K(VE)” and “MuteL” are displayed above soft keys.

Pressing the right soft key selects mute “MuteL”.

Pressing the left soft key selects Voice Enhancer “K(VE)”.

•When a function name does not appear above a soft key, the soft key has no function.

Handset navigator key

Scrolls up [B] and down [d] the function menu, the Caller List and the phone book.

Increases [B] or decreases [d] the handset ringer and receiver/speaker volumes.

Throughout these Operating Instructions:

•The soft keys are indicated by what is displayed above the keys. Ex. “Press Mute.” indicates “Press the soft key below Mute”.

•The navigator key is indicated by the arrows [d] or [B].

Base unit display

2 3 5

FULL

1 RINGER OFF

4 LINE IN USE

1“O” indicates the base unit ringer is off (p. 18).

2“ FULL ” flashes when no new messages can be recorded. Erase unnecessary messages (p. 62).

3“E” flashes until you set the date and time, and flashes after a power failure. If it is flashing, set the date and time (p. 14).

4“

LINE IN USE

” functions as follows.

Off (invisible)	The line is free.
On	The line is being used.
Flashing	A call is on hold on the handset or base unit or the
	Answering System is answering a call (p. 57).
Flashing rapidly	A call is being received.

•“ IN USE ” displays when a handset is operating the Answering System.

5 Message counter shows:

—the total number of recorded messages. If the recording time is set to “Greeting only”, “” will be displayed (p. 22).

—the selected volume level while you are adjusting the volume (p. 21, 28).

—“ ” when your greeting message or memo message was not recorded correctly (p. 21, 63).

8