Panasonic KX-TG2361JX operating instructions Programmable Settings Date and Time Handset

Programmable Settings

Date and Time Handset

You need to set the date and time;

—to display the time and date the calls were received in the Caller List, and

—to announce the day and time when each message was recorded, during a message playback.

1	Press [MENU].
2	Scroll to “Date and time” by pressing [d] or
		Date and time
	[B], then press Select.
		KBack dB SelectL
3	1 Enter 2 digits each for the day, month, and
		Date:31.12.2004
	year. (Ex. To set May 15, 2004, enter “15	Time:12:00 AM
	05 04”.)	KAM/PM	SaveL
	2 Enter 4 digits for the time (hour and minute).	Example
		Date:15.05.2004
	(Ex. To set 9:30, enter “0930”.)
		Time:09:30 AM
	• If you enter a wrong number, press [d] or [B] to	KAM/PM	SaveL

move the cursor to the incorrect number. Enter the correct number.

4Select “AM” or “PM” by pressing AM/PM.

Date:15.05.2004 Time:09:30 AM

KAM/PM SaveL

5Press Save.

•The date and time are set and “E” disappears from the base unit display.

•If the handset beeps 3 times, the date and time were not set correctly. Start again from step 3.

6Press [OFF].

•When entering the time in step 3, you cannot enter numbers greater than 12. Do not use military time. (To set 13:00 hours, enter “0100”, then select “PM” in step 4.)

The date and time may be incorrect after a power failure. When “E” flashes on the base unit display or “E Press MENU.” flashes on the handset display, adjust the date and time.

To adjust the date and time when “E Press MENU.” flashes on the handset display:

Press [MENU], then go to step 3 above.

To confirm the date and time, repeat steps 1 and 2 above.

• The current date and time are displayed. When finished, press [OFF].

14