Panasonic KX-TG2361JX Preparing the Answering System, To record a greeting message

Preparing the Answering System

To record a greeting message

Sample greeting message

“Hello, this is (your name and/or number). Sorry, I cannot take your call. Please leave a message after the beep. Thank you.”

Preparation

1Press [GREETING REC].

•“To record greeting, press RECORD again” is heard.

2Within 10 seconds, press [GREETING REC] again to record your greeting.

3After the long beep, talk clearly, about

20 cm away from the MIC (microphone).

•The elapsed recording time is displayed.

•If you record for over 2 minutes, the unit will stop recording.

4When finished, press [GREETING REC] or [STOP].

•To change the greeting, start again from step 1.

[GREETING REC]

[GREETING CHECK]

[ERASE]

[STOP]

MIC

VOLUME [<], [>]

•If “ ” is displayed, 6 beeps sound and “Your greeting was not recorded. Record your greeting again.” is announced, start again from step 1.

To adjust the speaker volume, press VOLUME [<] or [>] during

playback.

•9 levels (0–8) are available while using the Answering System. The level is displayed on the base unit.

To review the greeting

Press [GREETING CHECK].

To erase the greeting

Press [GREETING CHECK], then press [ERASE] while the recorded message is being played.

• The unit will answer calls with a pre-recorded greeting (p. 22).

21