Using the Caller List
34
• If a call has name information, the caller’s name and
phone number are alternately displayed as shown on
the right in step 2 on page 33.
• If an arrow ( ) is displayed after the number
in step 2 on page33, the whole phone number will not
be shown. Press [*] to see the remaining numbers or
to return to the previous display. Each time you press
[*], the display will change alternately.
What “,” means
“,” indicates you have already viewed this calling
information or answered the call. If the same caller calls
again, the call entry with the “,” will be replaced with the
new call entry.
If a caller calls more than once
The number of times the same caller called is displayed
(“×2” to “×9”). The date and time of the most recent call
will be recorded. After viewing a caller’s information,
“×2” to “×9” will be replaced with “,”.
Calling Back from the Caller List • In some cases, you may have to edit the number before dialing (p. 35).
• If a phone number is not displayed in the caller information, you cannot call that
caller back from the Caller List.
1Press Rcvd calls, [
d
], or [
B
] to enter the Caller List.
2Scroll to the desired caller by pressing [
d
] or [
B
].
3Press [C] or [s].
• The phone number is dialed.
JACK SMITH
3:10P 29JUN.
Erase Select
KL
15553334444
3:10P 29JUN.
Erase Select
KL
122233344445555
3:10P 29JUN.
Erase Select
→
KL
1222333444455556
666
Erase Select
KL
[*]
→
15553334444
3:10P 29JUN. ,
15553215555
11:20A 12JUN. ×2
Ex. Called 2 times.
Handset