Programming
Operating | Feature | Feature | Setting | System | Page |
unit |
| code |
| setting*1 |
|
Y/[ | VM tone detect | {3}{3}{2} | <On> | r | 43 |
| (VM: Voice mail) |
| Off |
|
|
Y/[ | Voice prompt | {1}{1}{2} | <English> | r | 16 |
| (Change language) |
| Español |
|
|
*1 If “System setting” column is checked, you do not need to program the same item using another unit. *2 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the
handset to answer a call, turn off this feature.
*3 The handset and base unit can display the Internet address where you can download the operating instructions or get further information for this product, using your computer.
*4 This tone lets you know when you receive an outside call while you are on the other line or an intercom call. If you select “On”, the tone sounds 2 times.
*5 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys, including confirmation tones and error tones.
*6 To prevent other users from joining your conversations with outside callers, turn this feature on.
*7 If you subscribe to a distinctive ring service (such as
*8 If you select one of the melody ringer tones, the ringer tone continues to play for several seconds even if the caller has already hung up. You may either hear a dial tone or no one on the line when you answer the call.
*9 The preset tones and melodies in this product are used with permission of © 2007 Copyrights Vision Inc.
*10When the ringer volume is turned off, ~is displayed followed by the selected line number(s) and the handset and/or base unit do not ring for outside calls.
*11The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary. The setting should stay at “700ms” unless pressing {FLASH} fails to pick up the waiting call.
*12Generally, the line mode setting should not be adjusted. If the LINE1 indicator or LINE2 indicator does not light when another phone connected to the same line is in use, you need to change the line mode to “A”.
*13This feature allows the unit to automatically adjust the date and time setting when caller information is received. To use this feature, set the date and time first.
For assistance, please visit http://www.panasonic.com/help | 31 |
