Getting started
Status | Meaning |
Flashing | An incoming call is now being |
rapidly | received on that line. |
Flashing | A call is put on hold or the |
| answering system is |
| answering a call on that line. |
Initial settings
Symbol meaning:
Symbol | Meaning |
YPerform with the handset.
[ | Perform with the base unit. |
Example: | Press {V} or {^} to select |
{V}/{^}: “Off” the words in quotations. | |
Display language
You can select either “English” or “Español” as the display language. The default setting is “English”.
YHandset / [ Base unit
1{MENU} i{#}{1}{1}{0}
2{V}/{^}: Select the desired setting.
3Press the middle soft key to save.
4Proceed with the operation for your unit. Handset: {OFF}
Base unit: {■} (EXIT)
Voice guidance language
You can select either “English” or “Español” as the voice guidance language of the answering system. The default setting is “English”.
Program this setting using either one of the handsets or the base unit.
[ Base unit
1{MENU} i{#}{1}{1}{2}
2{V}/{^}: Select the desired setting.
3{SAVE}
4Proceed with the operation for your unit. Handset: {OFF}
Base unit: {■} (EXIT)
Dialing mode
If you cannot make calls, change this setting according to your telephone line service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service. Program this setting using either one of the handsets or the base unit.
[ Base unit
1{MENU} i{#}{1}{2}{0}
2{V}/{^}: Select the desired setting.
3{SAVE}
4Proceed with the operation for your unit. Handset: {OFF}
Base unit: {■} (EXIT)
Date and time
Program this setting using either one of the handsets or the base unit.
YHandset / [ Base unit
1{MENU} i{#}{1}{0}{1}
2Enter the current month, date, and year by selecting 2 digits for each.
Example: July 15, 2009
{0}{7} {1}{5} {0}{9}
3Enter the current hour and minute
{0}{9} {3}{0}
4Press {*} to select “AM” or “PM”.
5{SAVE}
6Proceed with the operation for your unit. Handset: {OFF}
Base unit: {■} (EXIT)
Note:
L When English is selected as the display language,
L To correct a digit:
Handset: Press {^}, {V}, {<}, or {>} to move the cursor to the digit, then make the correction. Base unit: Press {^}, {V}, {7}, or {8} to move the cursor to the digit, then make the correction.
16 | For assistance, please visit http://www.panasonic.com/help |
