Copying phonebook entries, Editing entries

Phonebook

Editing entries

YHandset / [ Base unit

1Find the desired entry (page 23). i{MENU}

2{V}/{^}: “Edit” i{SELECT}

3Edit the name if necessary (16 characters max.; page 22). i{OK}

4Edit the phone number if necessary (24 digits max.). i{OK}

5{V}/{^}: Select the desired group (page 22). i{SELECT} 2 times

6Proceed with the operation for your unit. Handset: {OFF}

Base unit: {■} (EXIT)

Erasing entries

YHandset / [ Base unit

Erasing an entry

1Find the desired entry (page 23). i{MENU}

2{V}/{^}: “Erase” i{SELECT}

3{V}/{^}: “Yes” i{SELECT}

4Proceed with the operation for your unit. Handset: {OFF}

Base unit: {■} (EXIT)

Erasing all entries

1Proceed with the operation for your unit. Handset: {MENU} i{#}{2}{8}{0} Base unit: {C}

2{MENU}

3{V}/{^}: “Erase all” i{SELECT}

4{V}/{^}: “Yes” i{SELECT}

5{V}/{^}: “Yes” i{SELECT}

6Proceed with the operation for your unit. Handset: {OFF}

Base unit: {■} (EXIT)

Chain dial

This feature allows you to dial phone numbers in the phonebook while you are on a call. This feature can be used, for example, to dial a calling card access number or bank account PIN that you have

stored in the phonebook, without having to dial manually.

YHandset / [ Base unit

1Proceed with the operation for your unit. During an outside call:

Handset: {MENU} i

{V}/{^}: “Phonebook” i{SELECT}

Base unit: {C}

2{V}/{^}: Select the desired entry.

3Press {CALL} to dial the number.

Note:

L When a Bluetooth headset is registered to the base unit (page 48), {W} is displayed instead of {C} on the base unit’s left soft key in step 1. To enter the chain dial feature on the base unit:

During an outside call, press {MENU}. i {V}/{^}: “Phonebook” i{SELECT}

L When storing a calling card access number and your PIN in the phonebook as one phonebook entry, press {PAUSE} to add pauses after the number and PIN as necessary (page 18).

L If you have rotary/pulse service, you need to press {*} before pressing {MENU} on the handset or {C} on the base unit in step 1 to change the dialing mode temporarily to tone. When adding entries to the phonebook, we recommend adding {*} to the beginning of phone numbers you wish to chain dial (page 22).