Using Bluetooth devices
Using a Bluetooth wireless headset (optional)
By registering a Bluetooth headset to the base unit, you can have a
Important:
L Up to 2 headsets can be registered to the base unit. However, only 1 Bluetooth headset can be used at a time.
L For best performance, we recommend using a Bluetooth headset within 1 m (3.3 feet) of the base unit. A headset can communicate with the base unit within a range of approximately 10 m (33 feet).
Registering a headset
1Your headset:
Set your headset to registration mode. L Refer to your headset operating
instructions.
2Base unit:
{MENU}i{#}{6}{2}{3}i{V}/{^}: “Add new device” i{SELECT}
3Base unit:
Enter your headset PIN.
L Typically, default PIN is “0000”. Refer to your headset operating instructions.
4Base unit:
{OK}
L When registration is complete, ] is displayed. You are ready to use the headset.
Note:
L When you register a 2nd headset, the 1st registered headset is disconnected from the base unit. To use the 1st registered headset, change the headset connection. See “Changing the headset connection (when 2 headsets are registered)”, page 48.
Reconnecting a headset
If ] is not displayed even when the headset is turned on, the headset has been disconnected from the base unit. Reconnect the headset.
Important:
L Make sure that the headset is turned on.
[ Base unit
1{MENU} i{#}{6}{2}{3}
2{V}/{^}: Select the headset indicated by “Q”. i{MENU}
3{V}/{^}: “Connect” i{SELECT} L ] is displayed.
4{■} (EXIT)
Disconnecting a headset from the base unit (when using a headset with another Bluetooth device)
To use your headset with another Bluetooth device such as a cellular phone, you may need to disconnect the headset from the base unit.
[ Base unit
1{MENU} i{#}{6}{2}{3}
2{V}/{^}: Select the headset indicated by “Q”. i{MENU}
3{V}/{^}: “Disconnect” i{SELECT} L ] disappears from the display.
4{■} (EXIT)
Changing the headset connection (when 2 headsets are registered)
Only 1 headset can be used at a time. If the headset you want to use is not connected to the base unit, change the connection to that headset.
Important:
L Make sure that the headset is turned on.
[ Base unit
1{MENU} i{#}{6}{2}{3}
2{V}/{^}: Select the desired headset. i
{SELECT}
L The selected headset is indicated by “Q”. L ] is displayed.
3{■} (EXIT)
48 | For assistance, please visit http://www.panasonic.com/help |
