Category Parameter Name Ref.
SIP_OUTPROXY_ADDR_[1–8]*1 Page 193
SIP_OUTPROXY_PORT_[1–8]*1 Page 193
SIP_TRANSPORT_[1–8]*1 Page 193
SIP_ANM_DISPNAME_[1–8] Page 194
SIP_ANM_USERNAME_[1–8] Page 194
SIP_ANM_HOSTNAME_[1–8] Page 194
SIP_DETECT_SSAF_[1–8]*1 Page 195
PHONE_NUMBER_[1–8]*1 Page 195
DISPLAY_NAME_[1–8]*1 Page 195
INTERNATIONAL_ACCESS_CODE Page 196
*1 This setting can also be configured through the Web user interface.
4.2 General Information on the Configuration Files

4.2.1 Configuration File Specifications

The specifications of the configuration files are as follows:
File Format
The configuration file is in plain text format.
File Size
The maximum size of a configuration file is 32,768 bytes. Regardless of the number of configuration files, the
total size of the configuration files must be 32,768 bytes or less.
Lines in Configuration Files
A configuration file consists of a sequence of lines, with the following conditions:
•Each line must end with "<CR><LF>".
•The maximum length of a line is 537 bytes including "<CR><LF>".
•The following lines are ignored:
–Lines that exceed the limit of 537 bytes
–Empty lines
–Comment lines that start with "#"
•Configuration files must start with a comment line containing the following designated character sequence
(28 bytes):
# PCC Standard Format File #
The hexadecimal notation of this sequence is:
23 20 50 43 43 20 53 74 61 6E 64 61 72 64 20 46
6F 72 6D 61 74 20 46 69 6C 65 20 22
•To prevent the designated character sequence being altered by chance, it is recommended that the
configuration file starts with the comment line shown below:
# PCC Standard Format File # DO NOT CHANGE THIS LINE!
132 Administrator Guide Document Version 2010.03.15
4.2.1 Configuration File Specifications