Value Range Max. 255 characters
Note
•The format must be RFC 1738 compliant, as follows:
"<schema>://<user>:<password>@<host>:<port>/<url-path>"
–"<user>" must be less than 64 characters.
–"<password>" must be less than 64 characters.
–"<user>:<password>@" may be empty.
–The total of "<schema>://" and "<host>:<port>/<url-path>"
must be less than 128 characters.
–":<port>" can be omitted if you do not need to specify the
port number.
•If "{mac}" is included in this URL, it will be replaced with the
unit’s MAC address in lower-case.
•If "{MAC}" is included in this URL, it will be replaced with the
unit’s MAC address in upper-case.
•If "{MODEL}" is included in this URL, it will be replaced with the
unit’s model name.
•If "{fwver}" is included in this URL, it will be replaced with the
unit’s firmware version.
•If this URL ends with "/" (slash), "{MODEL}.cfg" is automatically
added at the end of the URL.
For example, CFG_PRODUCT_FILE_PATH="http://host/
dir/" becomes CFG_PRODUCT_FILE_PATH="http://
host/dir/{MODEL}.cfg".
Default Value Empty string
Note
•The URL specified by your phone system dealer may be preset
in the unit.
Web User Interface Reference Product File URL (Page 121)
CFG_MASTER_FILE_PATH
Value Format String
Description Specifies the URL of the master configuration file, which is used when
all units need the same settings.
Note
•When you change this setting, set "PROVISION_ENABLE" to
"Y" at the same time.
146 Administrator Guide Document Version 2010.03.15
4.3.5 Provisioning Settings