2. [ ]/[ ]: Select the desired terminal number ("Auto", "Terminal 1"–"Terminal 9") ®
3. Base unit: [ ]
Handset: [ ]
2.1.6 Reset Web ID/Password
Reset Web ID/Password resets all the IDs and passwords required for users and administrators to access the
Web user interface (® see Access Levels (IDs and Passwords) in 3.2.1 Before Accessing the Web User
Interface) to their factory defaults. You can perform this operation from the base unit or one of the handsets.
To perform Reset Web ID/Password
In cases when buttons/soft key icons are shown in English alphabet
1. Base unit: [MENU] (middle soft key) ® [#][7][3][9]
Handset: [MENU] (center of joystick) ® [#][7][3][9]
2. []/[ ]: Select "Yes" ® [SELECT]
All the IDs and passwords are reset, and the base unit will restart.
In cases when buttons/soft key icons are shown in symbols/pictures
1. Base unit: (middle soft key) ® [#][7][3][9]
Handset: (center of joystick) ® [#][7][3][9]
2. [ ]/[ ]: Select "Yes" ®
All the IDs and passwords are reset, and the base unit will restart.
Notice
•Once you press [#][7][3][9], Reset Web ID/Password is performed immediately and without asking for
confirmation, regardless of the communication status. As a result, the base unit is disconnected from
the IP network immediately. For security reasons, it is recommended that the passwords are set again
immediately (® see 3.5.2 Administrator Password or 3.5.3 Change User Password).
38 Administrator Guide Document Version 2010.03.15
2.1.6 Reset Web ID/Password