Value Range 3–50 (´ 10 ms)
Note
•This setting is subject to the following conditions:
–This value must be greater than [Initial Delay]
–This value must be greater than [Minimum Delay]
–[Initial Delay] must be greater than or equal to [Minimum
Delay]
Default Value 20 (´ 10 ms)
Configuration File Reference MAX_DELAY_[1–8] (Page 171)
Minimum Delay
Description Specifies the minimum delay, in 10-millisecond units, of the jitter buffer.
Value Range 1 or 2 (´ 10 ms)
Note
•This setting is subject to the following conditions:
–This value must be less than or equal to [Initial Delay]
–This value must be less than [Maximum Delay]
–[Maximum Delay] must be greater than [Initial Delay]
Default Value 2 (´ 10 ms)
Configuration File Reference MIN_DELAY_[1–8] (Page 172)
Initial Delay
Description Specifies the initial delay, in 10-millisecond units, of the jitter buffer.
Value Range 1–7 (´ 10 ms)
Note
•This setting is subject to the following conditions:
–This value must be greater than or equal to [Minimum
Delay]
–This value must be less than [Maximum Delay]
Default Value 2 (´ 10 ms)
Configuration File Reference NOM_DELAY_[1–8] (Page 172)
3.6.4.4 DTMFDTMF Type
Description Selects the method for transmitting DTMF (Dual Tone Multi-Frequency)
tones.
94 Administrator Guide Document Version 2010.03.15
3.6.4 VoIP Settings [Line 1]–[Line 8]