Programmable Settings
52 For assistance, please visit http://www.panasonic.com/phonehelp
Line mode
Generally, the line mode setting should not
be adjusted.
When another phone connected to the
same line is in use, and
–if k or l is not displayed on the
handset, or
–if {LINE1} or {LINE2} button light is off
on the base unit,
you need to change the line mode to “A”.
LYou only need to program this setting
once, using either the handset or base
unit.
1{MENU} (center of joystick) i h i
{SELECT}
2Set tel linei {SELECT}
3Set line modei {SELECT}
4Select the desired line.
5Select the desired setting. (Default: “B”)
i {SAVE} i {OFF}
1{MENU} i h i {SET}
2Set tel linei {SET}
3Set line modei {SET}
4Select the desired line.
5Select the desired setting. (Default: “B”)
i {SET} i {STOP}

Changing the PIN (personal

identification number) o

For security, the PIN must be entered
when changing certain settings such as
registering units. The default setting is
7262”.
Important:
LIf you change the PIN, please make note
of your new PIN. The unit does not
reveal the PIN to you.
1{MENU} i h i {SET}
2Set PINi {SET}
3To change the PIN for the first time, skip
to step 4.
To change the PIN, enter the current 4-
digit PIN. i {SET}
4Enter the new 4-digit PIN. i {SET}
5Enter the new 4-digit PIN again. i
{SET} i {STOP}
If you forget the PIN (resetting the base
unit to its default settings)
If you set the PIN and you cannot
remember it, you can reset the base unit
using the following procedures.
Base unit:
{MENU} i {MUTE} i
{#}{9}{0}{0}{0}
Note:
LThe following items are reset to their
default settings:
– Settings checked in the base reset
column on page 93
– Answering system: On
– Line selection for answering system:
Line 1 and line 2
LIf you have registered a cellular phone,
the following cellular phone settings are
also reset to their default settings.
–“Assign Base/HS” (Allows you to
select which unit to ring for cellular
calls, page 69): “All
Handset
Base unit
TH102-C.book Page 52 Monday, March 13, 2006 2:41 PM