Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp 75
Wall mounting

Base unit

The base unit can be mounted on a wall phone plate.
1Tuck the telephone line cord inside the wall mounting adaptor.
2Insert the upper hooks (A), then the lower hooks (B) on the wall mounting adaptor into
the holes on the base unit until it clicks into the place.
3Connect the telephone line cord. Mount the base unit by inserting the mounting pins
into the round openings on the adaptor (for pin B, use round cut out at the bottom of
the adaptor if you’re using the 4 inches phone plate), then sliding the base unit down
to secure it.
Connect the AC adaptor to power outlet (page 13).
LThere are two common types of wall phone plates. The distance between A and B
may vary depending on the size of the wall phone plate installed.
LRaise the antennas.
A
B
83 mm
(31/4 inches)
or
102 mm
(4 inches)
(120 V AC, 60 Hz)
102 mm
(4
inches
)
83 mm
(31/4 inches)
TH102-C.book Page 75 Monday, March 13, 2006 2:41 PM