Replacing Motor Safety Filter
Motor Safety Filter
Filtre de sécurité du moteur Filtro de sequridad
del motor
Motor Safety Filter |
Filtre de sécurité |
du moteur |
Filtro de |
sequridad |
del motor |
Ribs |
Rainures |
Estrías |
Motor Safety Filter
Filtre de sécurité du moteur Filtro de sequridad
del motor
The filter must be replaced when dirty. It should be replaced regularly depending on use conditions. The filter CANNOT be washed as it will lose its dust trapping ability.
WARNING
Electrical Shock Hazard
Do not operate the vacuum cleaner without the motor safety filter. Be sure the filter is dry and properly installed to prevent motor failure and/or electrical shock.
➢Check motor safety filter frequently and change when dirty.
➢Remove the dust bag as outlined in the DUST BAG CHANGING section.
NOTE: See PARTS IDENTIFICATION for motor safety filter number.
➢If the filter, located in the bottom of the bag cavity, is dirty, remove it by pulling forward out from under the ribs.
➢Replace the filter, smooth (white) side up, by sliding it back into place under the ribs in the bag cavity.
➢Replace the bag as outlined in the DUST BAG CHANGING section.
- 46 -
