Headlight Wire
Fil électrique du dispositif d'éclairage El cable de la luz
Lock Tabs Securely In Place Mettre les loquets en position fermée Asegurar las lengüetas estén
en su colocación apropiada
Latches
Loquets
Pestillos
Nozzle Cover
Couvercle
de la base
Cubierta de la boquilla
Note: If the agitator cover is not installed correctly, you may experience a loss of performance and possible agitator vibration, etc.
➢Make sure the headlight wires are tucked securely in place.
➢Replace the nozzle cover and secure the latches.
Cleaning Agitator
➢ Clean agitator after every five uses and every time the belt is replaced.
➢ Cut off any carpet pile and lint entangled around agitator with a pair of scissors.
➢ Remove agitator.
➢ Remove any string or debris located on the end caps, washers or agitator shaft.
➢ Reinstall agitator, agitator cover, and nozzle cover
- 56 -
