Panasonic MC-UG693 manuel dutilisation Note See PARTS IDENTIFICATION for belt number

Agitator
Agitateur
Agitador		Slot
	End Cap	Fente
Nozzle Base		Ranura
	Bouchon
Partie inférieure
	Tapo del
de la base
	extremo
Base

Agitator

Agitateur

Agitador

Belt

Courroie

Correa

Latches

Languettes

Pestillos

Tabs/Slots

Languettes/fentes

Lengüetas/ Ranuras

Furniture

Guard

Retainer

Retenue de pare-chocs Sujetador del protector de meubles

	Post
	Borne
Agitator Cover	Pestaña
Couvercle de l’agitateur
Cubierta del agitador

Note: See PARTS IDENTIFICATION for belt number.

➢Loop the other end of the belt on the belt pulley on the agitator.

➢Insert the agitator by placing the rounded portion of the end cap down into the slot in the nozzle base.

Note: It may be necessary to hold the furniture guard out of the way in order to allow proper insertion of the agitator into the nozzle base.

Note: Care must be taken due to the belt tension during reassembly.

➢Press firmly, checking to see that each end is completely inserted.

➢Check to see that the belt is centered on the belt pulley. Turn the agitator with your fingers to see that it turns freely.

➢To re-attach the agitator cover, insert the six (6) tabs into the six slots along the front edge of the nozzle base.

➢Lower the agitator cover to its original position.

➢After positioning the agitator cover, push forward on the two (2) locking tabs in order to ensure that they are securely in place.

➢Re-fasten the furniture guard retainers to the posts on both sides of the agitator cover.

- 54 -