Care of Your Oven
BEFORE CLEANING:
Remove plug from outlet. If impossible, leave oven door open to prevent oven from accidentally turning on.
AFTER CLEANING:
Be sure to replace the Roller Ring and Glass Tray in the proper position and press Stop/Reset Pad to clear the Display Window.
Inside of the oven: | Glass Tray: | Outside oven surfaces |
Wipe with a damp cloth. Mild | Remove and wash in warm soapy | and back vents. |
detergent may be used if the oven | water or in a dishwasher. If grease | To prevent overheating |
gets very dirty. The use of harsh | accumulates, clean with a non- | caused by blocked vents, |
detergent or abrasives is not | abrasive nylon mesh scouring pad | clean periodically with |
recommended. | and a | damp cloth. To prevent |
|
| damage to the operating |
|
| parts inside the oven, |
|
| water should not be |
|
| allowed to seep into |
|
| ventilation openings. |
|
| Control Panel: |
|
| •If it becomes wet, clean |
|
| with a soft, dry cloth. Do |
|
| not use harsh detergents |
|
| or abrasives on the |
|
| Control Panel. |
Oven Door: | Roller Ring and oven cavity floor: | ||
Wipe with a soft cloth when steam accumulates | Wipe the bottom surface of the oven with mild | ||
inside or around the outside of the oven door. | detergent water or window cleaner and dry. | ||
This may occur when the microwave oven is | Roller Ring may be washed in mild soapy | ||
operated under high humidity conditions and in | water or dishwasher. These areas should be | ||
no way indicates a malfunction of the unit or of | kept clean to avoid excessive noise and | ||
microwave leakage. | scratching of painted surface. | ||
|
|
| |
| Technical Specifications |
| |
|
|
| |
|
|
|
|
|
| ||
| Power Supply: | 230 - 240 V 50 Hz | |
| Power Consumption*: | 1,050 W | 4.6 A |
| Power Requirement: | 1,800 W | 7.8 A |
| Output*: | 1,100 W | |
| Outside Dimensions (H x W x D): | 301 x 518 x | 404 mm |
| Oven Cavity Dimensions (H x W x D): | 225 x 375 x | 386 mm |
| Operating Frequency: | 2,450 MHz | |
| Uncrated Weight: | Approx. 11.8 kg |
*IEC Test Procedure
Specifications subject to change without notice.